Boundary Sandstone Rock Excavation by DL Civil
DL Civil emblemEastern Suburbs | Rock Sawing & Hammering

Boundary Sandstone Rock Excavation

Low-vibration diamond rock sawing and sandstone breakout directly adjacent to an existing Eastern Suburbs masonry boundary wall.

Ground ProfileHawkesbury Sandstone
Primary Plant14.5t Case + Diamond Saw
Vibration ControlLow-Vibration Wet Cut (DIN 4150-3)
OutcomeSquare Boundary Face, Zero Claims

1. Site Challenge

Coastal Eastern Suburbs blocks frequently transition from shallow sand straight into high-strength Hawkesbury sandstone. On this site, the sandstone shelf extended directly under the boundary masonry wall of the adjoining residence, leaving zero margin for uncontrolled hydraulic hammering shock.

2. Engineering Method & WHS Controls

Prior to mechanical breakout, DL Civil reviewed the site dilapidation baseline and deployed our 14.5t Case excavator fitted with a heavy-duty hydraulic diamond rock saw and continuous wet dust suppression. We sliced clean vertical relief cuts along the boundary alignment to isolate the adjacent wall before switching to silenced hydraulic hammering and rock grinding for the internal bulk removal.

3. DL Civil Plant Deployed

  • 14.5t Case Short-Radius Excavator (VOC operator)
  • Hydraulic Diamond Rock Saw with integrated wet silica dust suppression
  • Silenced Hydraulic Rock Hammer & Rotary Rock Grinder for final face trim
  • 8t Rigid Tipper & 6x4 Bogie Tipper cycles from Banksmeadow yard

4. Programme Outcome

A razor-straight vertical sandstone cut right on the boundary line with zero vibration damage to the neighbouring residence. Because the face was cut square without over-break, the builder avoided thousands of dollars in wasted shotcrete and formwork.

EASTERN SUBURBS | FIELD FOOTAGE Project field footage: Boundary Sandstone Rock Excavation
Boundary Sandstone Rock Excavation secondary site photo
Call 0450 800 006 Get Fast Quote